thank you e-sailing , good to know i just installed a node red mcp3008 node it has that choice in its config.
i'll have a look at that file later.
i'll have a look at that file later.
Configuring SPI MCP3008
|
thank you e-sailing , good to know i just installed a node red mcp3008 node it has that choice in its config.
i'll have a look at that file later.
i found all the parts pieces and breadboard for testing.
i did the change in the file e-sailing posted ..that should be all you need to do. sudo nano /home/pi/.config/openplotter/read_sensors_d.py change "spi.open(0,1)" to "spi.open(0,0)". (line 437) ctrl x y let me know if that works for you.. (2019-03-24, 12:49 PM)jim321 Wrote: no you can setup sensors without the hat I'm also hope for it. But now I have the next situation (by version 1.2.0): SPI device is working but we can to see only "raw" data (not real). For example, Ubat has near 750V. Checkbox "convert" doesn't works because "value_0 is not defined". Value setting button is not working also. Previouse version 1.0.0 works correctly (in this tab). How to solve this problem? Please help me.
2019-06-09, 02:04 PM
(2019-04-22, 02:21 PM)sapers Wrote:(2019-03-24, 12:49 PM)jim321 Wrote: no you can setup sensors without the hat Yes, I have the same problem. Is there someone who solved this problem?
2019-06-09, 02:12 PM
(2019-04-22, 02:21 PM)sapers Wrote:(2019-03-24, 12:49 PM)jim321 Wrote: no you can setup sensors without the hat
2019-06-10, 12:45 PM
Can you please check if you have the latest file /home/pi/.config/openplotter/classes/edit_MCP.py?
(It should be this one. https://raw.githubusercontent.com/sailoo...dit_MCP.py) You can easily check if you have it by searching for the line. wx.Dialog.__init__(self, None, title=title, size=(450, 270)) |
« Next Oldest | Next Newest »
|