2020-07-05, 10:02 PM
All I needed to do was configure a SK connection for the serial ports in SK Server with the correct baud rate. In your case looks like you have a GPS and a seperate AIS feed. So you need 2 connections in SK server both NMEA Serial baud rate 4800 for GPS and (38400 ?) for the AIS data . Both sets of data are sent to the internal 10110 port. Your OpenCPN connection looks ok.
You should see the data in OpenCPN. You can look at the config of my input connections in this post https://forum.openmarine.net/showthread.php?tid=2711 my inputs work perfectly I have configured nothing in the serial app. Simply just connections in SK server. My issue is I cannot get SK to send data out to my serial port.
Hope this helps you.
Cheers
Spart
You should see the data in OpenCPN. You can look at the config of my input connections in this post https://forum.openmarine.net/showthread.php?tid=2711 my inputs work perfectly I have configured nothing in the serial app. Simply just connections in SK server. My issue is I cannot get SK to send data out to my serial port.
Hope this helps you.
Cheers
Spart