Posts: 344
Threads: 75
Joined: Mar 2016
Reputation:
12
2020-07-10, 03:45 PM
(This post was last modified: 2020-07-21, 06:30 PM by Sailoog.)
Randomly the console (screen, keyboard and mouse) disappears, the screen displays "no signal", the only possibility I am left with is to connect to the AP to reboot properly the machine !
Did someone had the same issue?
This bug prevents me to use OP2 at sea !!!
I am using the following img : 2020-03-24-OpenPlotter-v2-Starting-img on a Pi4-4GB
Terminal answer to ths command openplotter :
pi@Openplotter:~ $ openplotter
bash: openplotter : commande introuvable
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you
Posts: 3,074
Threads: 64
Joined: Mar 2016
Reputation:
296
I do not understand.
what the "the console (screen, keyboard and mouse)" means?
your monitor gets blank?
Posts: 344
Threads: 75
Joined: Mar 2016
Reputation:
12
Yes, screen displays : "no signal", and that's it !
Thanks to on/off buton on the Argon case I can force a reboot, or, alternately when i'm lucky, open a new console with VNC on a phone or tablet to force a reboot ...
In that case I can see that OpenCPN is still alive, and we know weird things happen when the machine is rebooted while openCPN is running ...
All this is a drawback to usual OP reliability and excellent stability...
It seems the HDMI is quite sensitive to power condition.
I used a 3A 5V supply, I changed it for a TOBSUN module 12/24VDC to 5V 5A, 25 W, and never saw anymore the under-voltage symbol !
I just added today an output capacitor 440 µF to try to improve the things... I will inform back if any change ...
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you
Posts: 3,074
Threads: 64
Joined: Mar 2016
Reputation:
296
this does not seem an openplotter bug, marking as closed, reopen if necessary.
