This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
beginner Moitessier HAT Node-Red
#1
Hello, an absolute node red beginner needs your help.
Can someone explain to me how I can display the temperature

 and or Kompass, GPS data from Moitessier HAT in Node-Red?

I would be very grateful...
Reply
#2
Have you tried the KIP app? Makes much better dashboards than you can make in node-red imho.
Reply
#3
Thanks for the tip, I'll take a look at it.
My real problem is the sensors.
I have no idea how I get the data from SignalK, OpenCPN (moitessier-hat) in Node-Red ...
Reply
#4
Just use a signalk input node >
[Image: QNPni8F.png]

What do you want to do with the data?
Reply
#5
only show in the node-red dashboard.
As an example, I have my GPS position in OpenCPN. 

How can I output this information in node-red?
Reply
#6
Please find enclosed a NodeRed file wich subscribes and shows some data in the Dashboard. 2 ways is used, via a function node or SK subscribe node. With NR installed as a plugin inport the flow. I'm using the sample file NMEA 2000 file as input which I have described here https://pysselilivet.blogspot.com/2020/0...pnsig.html
Enjoy !
   


Attached Files
.txt   WEB_sock_subscribe.txt (Size: 6.45 KB / Downloads: 2)
________________________________________

Blogg; https://pysselilivet.blogspot.com/
Reply
#7
(2020-07-30, 08:08 AM)MatsA Wrote: Please find enclosed a NodeRed file wich subscribes and shows some data in the Dashboard. 2 ways is used, via a function node or SK subscribe node. With NR installed as a plugin inport the flow. I'm using the sample file NMEA 2000 file as input which I have described here https://pysselilivet.blogspot.com/2020/0...pnsig.html
Enjoy !


Great !! Many thanks. I'll take a closer look at that.

Why didn't I find this blog?
It was only through this site that I became aware of openPlotter Smile Smile
Go on ...
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)