2020-08-11, 10:51 PM
(2020-08-11, 09:20 PM)Phil Wrote: Hi,
I have connected my nmea 0183 loch datas: depth, wtaer temp, ... and logfile is ok for my device:
1597175775146;N;$VWVHW,,,,,00.0,N,00.0,K
1597175775146;N;$PTTKV,00.0,A,00.0,03339.0,00882.7,28.1,C
1597175775147;N;$PTTKD,003.8,A,B
1597175775147;N;$VWVLW,03339.0,N,00882.7,N
1597175775148;N;$VWMTW,28.1,C
1597175775148;N;$SDDPT,003.8,+0.0
1597175775312;N;$SDDBT,012.8,f,003.8,M,002.1,F
But nothing in signal K web app (dashboard, databrowser, ...).
For my wind data, everything works fine: log files and dash board and databrowser,...).
Bug ?
Thanks in advance for your help (last version of openplotter installed with signal K 1.26)
Best regards
Philippe
Your logfile messages don't have checksums, they should look like this >
$VWVHW,,,,,00.0,N,00.0,K*4D
If you can't get the devices to send with a checksum then in the signalk connection set validate checksum to no and append checksum to yes. Though not all messages are decoded into signalk
https://github.com/SignalK/signalk-parser-nmea0183