(2020-08-28, 04:41 PM)SYWindveer Wrote: Try connecting a pair of LED's with 10K series resistor to the motor output. ( without the actuator)
You should see the LED's switch on depending on direction
As in this pic :
https://www.google.com/imgres?imgurl=htt...egUIARCSAQ
If this works your actuator may be defective or the power supply can't provide enough current.
You may want to try a boat or car battery instead
My problem isn't anything to do with lack of current or a defective actuator. My problem is with the motor controller. I cant connect it to the psu (with or without the actuator) without the psu shorting.