2020-10-02, 09:28 AM
Hi, I see the devices on the MCP2515 tab, but I cannot add them to a SignalK connection because the buttons are greyed out.
Before I used the /boot/config.txt and added dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=25,spimaxfrequency=2000000
Then I could add can0 to SignalK as a NMEA2000 connection.
What do I need to do? Enable or disable the dtoverlay?
Add the can0 connection in SignalK manually?
Before I used the /boot/config.txt and added dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=25,spimaxfrequency=2000000
Then I could add can0 to SignalK as a NMEA2000 connection.
What do I need to do? Enable or disable the dtoverlay?
Add the can0 connection in SignalK manually?