This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New image for rpi with better touch support
#1
Available for download from here

https://cloudsmith.io/~bbn-projects/repo...=lysmarine

Thanks
Reply
#2
Is there any more detail or explanation of what this is?
Is this an openplotter image? Any details?
Reply
#3
It’s LysMarine OS image.
Reply
#4
(2020-11-06, 12:33 AM)mgrouch Wrote: It’s LysMarine OS image.

Does not work here on my RPI 4. Complains about GPIO
Reply
#5
(2020-11-06, 11:43 AM)verkerkbr Wrote:
(2020-11-06, 12:33 AM)mgrouch Wrote: It’s LysMarine OS image.

Does not work here on my RPI 4. Complains about GPIO

Just tried the latest version (this morning)n and can report this version works.

Not yet tried how it is working.
Reply
#6
It is allready based on RaspiOS 64 bits. Works very well. With SignalK, MXTommy Kip OpenCPN etc. allready installed. The wait is now for the 64 bits version of OpenPlotter. I'am convinced that 64 bits works much better.

The only problem I had, was using my GPSmouse. /dev/ttyACM0 was not executable. I had to change the rights. Then It can be set in SignalK and is working. And in OpenCPN SignalK input with automatic discovery generates IP adres and port 80 instead of 3000.
Reply
#7
New image is available
https://cloudsmith.io/~bbn-projects/repo...=lysmarine

The focus of changes was

Better touchscreen support,
Arm64,
Better WiFi support
Sound
Added music player (mopidy, still needs some config improvements)

Desktop panel still causes some issues with touchscreen

The source code for the project is here
https://github.com/bareboat-necessities/lysmarine_gen

The image is built using CircleCi
Reply
#8
Hi MG,

tried the latest WIP images. However this does not work here. Locks up during boot session.

I also have some problems with the serial GPS mouse settings. Not allowed to use the ttyAMA0 and ACM0 settings.

Bram
Reply
#9
(2020-11-20, 10:43 AM)verkerkbr Wrote: Hi MG,

tried the latest WIP images. However this does not work here. Locks up during boot session.

I also have some problems with the serial GPS mouse settings. Not allowed to use the ttyAMA0 and ACM0 settings.

Bram

Newer version is available
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)