OpenMarine

Available for download from here

https://cloudsmith.io/~bbn-projects/repo...=lysmarine

Thanks

Is there any more detail or explanation of what this is?
Is this an openplotter image? Any details?

It’s LysMarine OS image.

(2020-11-06, 12:33 AM)mgrouch Wrote: [ -> ]It’s LysMarine OS image.

Does not work here on my RPI 4. Complains about GPIO

(2020-11-06, 11:43 AM)verkerkbr Wrote: [ -> ]

(2020-11-06, 12:33 AM)mgrouch Wrote: [ -> ]It’s LysMarine OS image.

Does not work here on my RPI 4. Complains about GPIO

Just tried the latest version (this morning)n and can report this version works.

Not yet tried how it is working.

It is allready based on RaspiOS 64 bits. Works very well. With SignalK, MXTommy Kip OpenCPN etc. allready installed. The wait is now for the 64 bits version of OpenPlotter. I'am convinced that 64 bits works much better.

The only problem I had, was using my GPSmouse. /dev/ttyACM0 was not executable. I had to change the rights. Then It can be set in SignalK and is working. And in OpenCPN SignalK input with automatic discovery generates IP adres and port 80 instead of 3000.

New image is available
https://cloudsmith.io/~bbn-projects/repo...=lysmarine

The focus of changes was

Better touchscreen support,
Arm64,
Better WiFi support
Sound
Added music player (mopidy, still needs some config improvements)

Desktop panel still causes some issues with touchscreen

The source code for the project is here
https://github.com/bareboat-necessities/lysmarine_gen

The image is built using CircleCi

Hi MG,

tried the latest WIP images. However this does not work here. Locks up during boot session.

I also have some problems with the serial GPS mouse settings. Not allowed to use the ttyAMA0 and ACM0 settings.

Bram

(2020-11-20, 10:43 AM)verkerkbr Wrote: [ -> ]Hi MG,

tried the latest WIP images. However this does not work here. Locks up during boot session.

I also have some problems with the serial GPS mouse settings. Not allowed to use the ttyAMA0 and ACM0 settings.

Bram

Newer version is available

New version is available here

https://cloudsmith.io/~bbn-projects/repo...ges/?q=lys

There are number of outstanding known issues which will be addressed, but it getting closer to what could be called "First release"
I'd really appreciate feedback and bug reports.

Thanks,
--MG