This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Charts Cm93 without text.
#1
Why with the Raspberry + OpenCpn 5.2.0 there is not text for the harbours in the chart ? the Depht, ligthouse etc., they are represented.
Reply
#2
(2020-12-06, 08:10 PM)mbargunyo Wrote: Why with the Raspberry + OpenCpn 5.2.0 there is not text for the harbours in the chart ? the Depht, ligthouse etc., they are represented.

Hi, probably an option issue :
  1. You  hit the 'T' key inadvertently, do it again ;
  2. Menu bar / view /  check the 'Show ENC Text' box
  3. Lower Right Hamburger button : check the 'show Text' box
  4. Upper Left Hamburger button : Options /Charts / Vector charts : verify 'important text only' box is NOT checked ;
  5. Upper Left Hamburger button : Options /Charts / Vector charts : in the User Objects sub windows, scroll down, check the 'Text' box ;
  6. Hit the  'D' key, in the 'CM93 details windows' move the cursor further to the right
If none of the above applies, and if no other forumer has more suggestion, then the issue may lie in your CM93 chart set itself !
Cordialement
Didier B
Pi4, SSD USB3, OP 2.6.2, OC  5.2.4




Reply
#3
Thank you very much for your quikly response, I have tried with 'Show ENC Text' box and I check the Text Box and it has worked, perfect.
Best regards
Mario
Reply
#4
(2020-12-07, 08:00 PM)mbargunyo Wrote: Thank you very much for your quikly response, I have tried with  'Show ENC Text' box and I check the Text Box and it has worked, perfect.
Best regards
Mario

You are welcome ! Hem ... may I suggest ? OpenCPN has a very detailed Doc, 1st thing : RTFM ! Angel
Cordialement
Didier B
Pi4, SSD USB3, OP 2.6.2, OC  5.2.4




Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)