2021-04-14, 03:53 PM
(This post was last modified: 2021-04-14, 04:30 PM by Guttagrynna.)
I should have written autodiscover. That's what i meant. It doesn't show up in the Pypilot interface of Openplotter.
EDIT: I now get one of the units to work. So problem solved, I suppose. Now I know how to get it to work, but not quite sure what I did wrong before. But the fact remains that some of the units get detected by i2cdetect but not by Autodiscover, which is OK, just a feature of the software. I suppose it only gets auto discovered if it actually is functioning.
EDIT 2: It turns out I didn't detect the IMUs before since I was using a PiJuice HAT that also uses the 68 address. So when i removed the PiJuice things started working, at least one IMU, that is.
EDIT: I now get one of the units to work. So problem solved, I suppose. Now I know how to get it to work, but not quite sure what I did wrong before. But the fact remains that some of the units get detected by i2cdetect but not by Autodiscover, which is OK, just a feature of the software. I suppose it only gets auto discovered if it actually is functioning.
EDIT 2: It turns out I didn't detect the IMUs before since I was using a PiJuice HAT that also uses the 68 address. So when i removed the PiJuice things started working, at least one IMU, that is.