This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Py Zero 2 W is Out!
Yes a firmware upgrade feature over the web would be a very nice addition. Could you please create an issue on github ( https://github.com/pypilot/pypilot/issues ) as a reminder ?

Anyway, I plan to release a new full tinypilot-13 image in a few days with the updated pypilot code inside.
Reply
(2023-04-17, 09:19 PM)stelian Wrote: @hans-martijn: new pypilot build at https://www.popies.net/pypilot/unstable/pypilot.tcz which should fix the rudder signalk issues.

Bugfix has been submitted in github : https://github.com/pypilot/pypilot/pull/197

Hi Stelian,

Sorry it took a while; I had some power problems on board (someone in the harbor pulled the plug apparently), and that has made the disk of the raspberry with signalk corrupt.

So, after a reinstall of almost everything, I can check again, and with the latest pypilot.tcz, I don't get a connection to the signalk-server. It isn't in the list (obviously, since I reinstalled it) of devices anymore, and it doesn't ask for access. I'm not sure whether I can test more tonight, since I don't have a vpn at the moment, but I'll try to make it work if you need some more. Otherwise I'll be here tomorrow again, since I have a lot of plumbing to do.

-Hans

-Edit: tonight I restarted signalk and the tinypilot simultaneously, and it did work. I tried that this afternoon too, but probably something is different tonight.

*update*
after some more testing (I'm procrastinating working on the fresh-water pipelines in the boat), I found out that if I restart my signalk-server, I have to simultaneously restart the tinypilot, and the other way around. Otherwise there'll be no connection established.
Reply
(2023-04-20, 01:38 PM)stelian Wrote: Yes a firmware upgrade feature over the web would be a very nice addition. Could you please create an issue on github ( https://github.com/pypilot/pypilot/issues ) as a reminder ?

Anyway, I plan to release a new full tinypilot-13 image in a few days with the updated pypilot code inside.

Is there any news for the new image?
Good wind anyway, always
Reply
Today I updated signalk to version 2.0.0. In retrospect, I shouldn't have done that, but unfortunately I'm not at my clearest early in the morning. It came down to removing all of signalk, and reinstalling it again. Unfortunately, I lost all connections, and you guess, I lost the pypilot connection too. At the moment rebooting or restarting services doesn't help to get the connection up and running again. Later this afternoon I'll try again, otherwise I'll have to try reinstalling the tinypilot again.

I'll keep you guys posted.

-Hans
Reply
Thanks for the reports. I haven't had much time lately, and since Sean has been busy as well there haven't been any bugfixes, so I didn't release a new image yet. But I'm still planing to.
Reply
No problem Stelian, I am at my boat today, so I could actually disconnect the Pi from power, and after booting it immediately connected to the server. Perhaps that's different from rebooting it from ssh.

-Hans
Reply
(2023-06-28, 08:51 PM)stelian Wrote: Thanks for the reports. I haven't had much time lately, and since Sean has been busy as well there haven't been any bugfixes, so I didn't release a new image yet. But I'm still planing to.

Ciao Stelian, Is there any news for the new image?  Cool

Good wind anyway, always!
Reply
Updated pypilot.tcz image (2024-03-13 / 623c0b6):
https://drive.google.com/file/d/14jumDaK...8vG5XK0M73
Reply
(2024-03-19, 08:08 PM)matze Wrote: Updated pypilot.tcz image (2024-03-13 / 623c0b6):
https://drive.google.com/file/d/14jumDaK...8vG5XK0M73

Hi matze,

Thanks! I updated the one on my boat, fingers crossed to have it still working next week.

-Hans
Reply
(2024-03-27, 04:40 PM)hans-martijn Wrote:
(2024-03-19, 08:08 PM)matze Wrote: Updated pypilot.tcz image (2024-03-13 / 623c0b6):
https://drive.google.com/file/d/14jumDaK...8vG5XK0M73

Hi matze,

Thanks! I updated the one on my boat, fingers crossed to have it still working next week.

-Hans

Update: I have to reboot both signalk-server and pypilot daily to keep them connected. Time on the pypilot is off about three years, which might be the problem? I set the time and we'll see...

-hans
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)