(2022-09-26, 09:03 PM)Celestine Wrote:Hi,(2022-09-26, 09:00 PM)Sailoog Wrote: the N2K connection is not a serial connection so only allows N2K data, no commands for configuration.
the USB connection allows NMEA 0183 and commands to configure the MAIANA.
you can use both at the same time but only if you do not send N2K data back to your openplotter because you will have duplicated data.
you can also connect both and unplug the USB after the device is configured.
Ok, got it!
P
I made some more tests yesterday. Defining the Maiana n2k adapter as “port” let me install it an letting the serial app create an SK connection. I could also approve it an set read/write rights to it.
However, when I restart SK I get error “…cannot lock port” See enclosed image.
Also, with the Maiana adapter connected SK refuse to communicate on the n2k adapter port. It’s there an no error but no data from the n2k network shows up in SK. Made about 10 restarts, same thing. As soon as I removed the Maiana adapter and made a restart n2k data started flowing.
Cheers
P