Posts: 3
Threads: 2
Joined: Feb 2023
Reputation:
0
Hi, I have been using OpenCPN for a number of years on a windows laptop. I have recently opted for a raspberry PI 4 with the latest version of Openplotter. However, i am struggling at the moment to use OpenCPN because it freezes when the connected serial GPS (to the PI) gets a fix. Signal K shows the connection and data coming in ok. I have also started to consider the Avnav plugin and it has no problem with the attached GPS. Could someone help with this?
Posts: 2,836
Threads: 60
Joined: Mar 2016
Reputation:
267
It seems that there is a problem with OpenCPN trying to digest "null" signal K values. this was fixed in OpenCPN 5.6.2 but the fix never got published in the version that you install from Debian backports. However the same version 5.6.2 in the flatpak repository does contain this fix. The problem is that OpenCPN developers are really busy with OpenCPN 5.8 and it will take some time until this is properly fixed.
These are your options until this is fixed:
- Install OpenCPN 5.6.2 from flatpak.
- Use a network NMEA 0183 connection instead of the signal k one (TCP - localhost - 10110)
Posts: 2,836
Threads: 60
Joined: Mar 2016
Reputation:
267
If you don not have the flatpak version available after checking version is because you probably are in 32bit and flatpak is only for 64bit. You should try the NMEA 0183 way.
Posts: 8
Threads: 1
Joined: Sep 2019
Reputation:
0
Hello,
I also used openplotter and opencpn last year and there was no problem at all. At some point the Opencpn begun to freeze. I found out that as soon as I make the signalK connection Opencpn freezes in few seconds. I can get GPS position data but not data of the I2C sensors im my case Compass and BME280.
The network NMEA 0183 connection (TCP - localhost - 10110) doesn't solwe this problem.
Is there a workaround?
Posts: 2,836
Threads: 60
Joined: Mar 2016
Reputation:
267
have you tried the flatpak version?
Posts: 8
Threads: 1
Joined: Sep 2019
Reputation:
0
I hawe openplotter V2 installed on raspberry pi 4b 8 Gb. Is it possible to install the flatpack?
Posts: 2,836
Threads: 60
Joined: Mar 2016
Reputation:
267
OpenPlotter v2 is only for 32bit and there is not opencpn for 32bit in flatpack.