This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BerryGPS-IMU compatibility with MacArthur HAT
I've read through the thread and did a search using BerryGPS as the search term and did not see any prior questions/discussions about using the BerryGPS-IMU with the MacArthur HAT.  I noted that various sensor inputs can be made through the I2C input to the MacArthur HAT.  

I have tinkered with the BerryGPS-IMU V3 and a Raspberry Pi 3B using the GPIO pins for power and data with the BerryGPS-IMU mounted on the Pi.  

I saw that the MacArthur HAT is stackable with some other HATs.  Can the BerryGPS-IMU V3 or V4 be stacked on the MacArthur HAT for power and direct input of its data?  

I am very much looking forward to purchasing a MacArthur HAT and building a navigation computer for my sailboat.  

Sailoog requested that I provide the BerryGPS-IMU V3 pinout.  My knowledge of electronics/coding is quite limited but here is a link to the quick start guide for the BerryGPS-IMU that includes information on both V3 and V4 with a schematic for the V4 version.  I hope it provides sufficient information.

Many thanks.

Forum Jump:

Users browsing this thread: 1 Guest(s)