2024-01-30, 07:11 PM
Hi,
I'm testing out a Raspi5 with the OpenPlotter 4 beta. All seems to work well (can, serial, Maiana) except for my SensESP sensors. I was expecting Signal K Security Access requests, but not received any. I do see "ws.1ddd1d05-7998-453e-a14c-51529d8f4039" listed on the dashboard, but no data in the browser for it nor a Device listing. I use ->set_wifi("OpenPlotter", <MYPASSWD>) and ->set_sk_server("10.42.0.1",3000). I initially tried the same OP3 server address of "10.10.10.1" but then noticed the new server address used in OP4.
Is the fact that SenseESP sensors are not connecting a known bug? Or is this a feature with a solution that I'm not aware of?
I tried searching on OpenPlotter 4 and SenseESP and did not find any info, so I thought I would report my issue hear in the case that this is an unknown issue.
Paul
I'm testing out a Raspi5 with the OpenPlotter 4 beta. All seems to work well (can, serial, Maiana) except for my SensESP sensors. I was expecting Signal K Security Access requests, but not received any. I do see "ws.1ddd1d05-7998-453e-a14c-51529d8f4039" listed on the dashboard, but no data in the browser for it nor a Device listing. I use ->set_wifi("OpenPlotter", <MYPASSWD>) and ->set_sk_server("10.42.0.1",3000). I initially tried the same OP3 server address of "10.10.10.1" but then noticed the new server address used in OP4.
Is the fact that SenseESP sensors are not connecting a known bug? Or is this a feature with a solution that I'm not aware of?
I tried searching on OpenPlotter 4 and SenseESP and did not find any info, so I thought I would report my issue hear in the case that this is an unknown issue.
Paul