2024-02-13, 05:30 AM
(2024-02-12, 02:45 PM)Techstyle Wrote:(2024-02-12, 01:21 PM)Sailoog Wrote: autostart does work in OpenPlotter 4 because we use xxx.desktop files in /.config/autostart/ to do it. Try the autostart option in openplotter-opencpn-installer.
Do not use the lxsession approach to autostart because that will change when using Wayland or X11.
I will check again when I get home and send a screen shot, but the option to select autostart in the Openplotter OpenCPN installer was not available, I could not select it.
I didn't realize, I had to "check version" first, after I did it is no longer greyed out and I selected autostart. Additionally I removed the lxsession stuff I did yesterday and added a .desktop file to start up the Chromium browser. - thanks
additionally, with regard to my earlier initial findings on page 2, I added the following:
- heatsink case with twin fans: https://amzn.to/49vs1Xf
- a Pineberry Hatdrive Bottom: https://pineberrypi.com/products/hatdriv...0-for-rpi5
- a 256Gb M.2 PCI-e NVME SSD: https://amzn.to/3SzdtPL
The top part of the case touches all the hot chips and the Pineberry hatdrive bottom is below the Pi on small standoffs, with the base of the case below it and acting as a heatsink to the SSD.
The earlier reported temperature was 85C, and now with similar things running, I see 50C and have never heard the fans come on - the active fan circuit comes on at 60C