OpenPlotter 4 roadmap

[PaddyB]

On my boat, since using an cheap wifi-Router with LTE, all the Quirks are gone.
Try this First. The pi os is Not really an Multitasking and realtime Software.

So do yourself an favor and Remove The Software hotspot.

Holger

---

Possible is this: the opencpn with Peer to Peer leaves not enough cycles for the hotspot.

Remove one Point of error after the other, and i would start here.

I've been using a Pi for many years & the local created network has never been a problem, even running openplotter on a Pi Zero for several years. Send to peer  was completely fine on OP3 on a Pi3. This is almost certainly settings somewhere hidden....

Hi PaddyB,

I had all kinds of connection problems with the hotspot created by the pi. In the end had to reimage it and set up the network first thing, after that no issues. I saw several other posts that mentioned something similar to this.

It seems that the native hotspot is not as good as the one in OP3.

Thnx though it seems rock solid, it's just that opencpn running on the Pi won't send to peer.