2024-04-16, 02:00 PM
(This post was last modified: 2024-04-16, 02:06 PM by bektorkhan.)
(2024-04-15, 11:42 PM)Logdon Wrote: I'm a newbie and have a Pi 5 with a MacArthur HAT and I'm trying to get the usb gps a u-blox7 to work in Open Plotter 4. The gps is recognized in the Series section and it is in Signal K. It seems to have activity in but not activity out. The usb gps works in my other Pi 4 with Open Plotter 3. I'd appreciate any help anyone could give me with this. Thanks.
Alan
Make sure you have security rights to access it? I think dialout udev groups should work.
Bektorkhan
I did a quick testet on a BTT Pi board: Alwinner H616 CPU 1Gb Ram
On armbian Bookworm with open ENC charts.. worked fine.. with a USB Gps.
Open CPn
SignalK was a bitch to install swapped to death four times.. mem leak or how much Ram do you need.
did not run any other io!
Bektorkhan