Posts: 2,850
Threads: 59
Joined: Mar 2016
Reputation:
267
2024-02-18, 05:39 PM
(This post was last modified: 2024-02-18, 05:47 PM by Sailoog.)
Delete the SK connection and create it from openplotter-can by selecting the device and clicking "Add Connection".
Forget my previous suggestion, which was to try to establish the connection temporarily until Openotter-can is fixed. Just follow the manuals.
Posts: 27
Threads: 7
Joined: Feb 2024
Reputation:
1
I can't add connection. When I click on/highlight the device, the add connection remains greyed out as does check traffic. And there is no can0 listed under interface, though I don't know it that is significant.
Posts: 2,850
Threads: 59
Joined: Mar 2016
Reputation:
267
OK, that is weird, for some reason the can0 interface is not created and it should even if you have SPI disabled in preferences - Raspberry Pi configuration - interfaces.
I am not sure how to proceed. Could you start from scratch with a new OP4 image?
Posts: 27
Threads: 7
Joined: Feb 2024
Reputation:
1
How weird is a bad header pin? Fixed and working. Thanks for being so attentive.
Posts: 27
Threads: 7
Joined: Feb 2024
Reputation:
1
I am using the longer pins so I can add another hat. Unfortunately, one snapped below the plastic. When I took everything apart to test with a fresh-out-of -the-box pi 5, I pulled out the pins and one stayed put. (Pin 22, as it turns out.) On to the next thing.