Case for Pi5 with MacArthur HAT and NVME

[ozone_one]

I have posted my take on a case for an RPi5 with MacArthur HAT and Pimoroni bottom NVME.  I have printed and assembled it and it does work, but I may revise in the future should I see the need for a small 2510 cooling fan to help keep things cool.

I will also be posting a STEP file eventually, but I need to do a little cleanup first.

https://www.printables.com/model/781587

[Sailoog]

Cool!

I miss a slot for the SD card and a hole for the RPi5 power button.

[AndyV]

I have posted my take on a case for an RPi5 with MacArthur HAT and Pimoroni bottom NVME.  I have printed and assembled it and it does work, but I may revise in the future should I see the need for a small 2510 cooling fan to help keep things cool.

I will also be posting a STEP file eventually, but I need to do a little cleanup first.

https://www.printables.com/model/781587

Care to share the fusion 360 model (if thats what you used). I'd like modify your case a bit to include a couple other pieces of electronics, save me a pile of time mapping out the ports etc.