Hi,
I have a RPI3 with a sense hat and OP Alpha latest version running, using an old iPad mini as a display via VNC through the built in Access Point, and a GNS 2000 bluetooth GPS receiver.
It all works fine except that I do not see the Sense Hat sensors in the OPCN instrument panel selection criteria.
When I run the signal K diagnostics the values are there, but when I run the NMEA debugger in OPCN I only see values from the GPS.
In the lede-red dashboard the values are there as well, but I would like some of these to display in the OCPN instrument panel.
What am doing wrong?
Thanks in advance for any help.
Here are som screenshots from my settings:
[img]blob:http://forum.openmarine.net/8e82bfea-cf39-4a98-970e-fb0fb8126f02[/img]
[img]blob:http://forum.openmarine.net/5394b7f7-d91b-4178-bc46-9bbddaf2f7bb[/img]
[img]blob:http://forum.openmarine.net/1aa95d89-0b89-4ae9-a51d-8f626188c0c7[/img]
I have a RPI3 with a sense hat and OP Alpha latest version running, using an old iPad mini as a display via VNC through the built in Access Point, and a GNS 2000 bluetooth GPS receiver.
It all works fine except that I do not see the Sense Hat sensors in the OPCN instrument panel selection criteria.
When I run the signal K diagnostics the values are there, but when I run the NMEA debugger in OPCN I only see values from the GPS.
In the lede-red dashboard the values are there as well, but I would like some of these to display in the OCPN instrument panel.
What am doing wrong?
Thanks in advance for any help.
Here are som screenshots from my settings:
[img]blob:http://forum.openmarine.net/8e82bfea-cf39-4a98-970e-fb0fb8126f02[/img]
[img]blob:http://forum.openmarine.net/5394b7f7-d91b-4178-bc46-9bbddaf2f7bb[/img]
[img]blob:http://forum.openmarine.net/1aa95d89-0b89-4ae9-a51d-8f626188c0c7[/img]