2018-08-05, 10:53 PM
Hi Brian,
I am using openplotter 1.0.0.
On the CAN tab in OpenPlotter i have selected Enable N2K output.
On that same tab i selected "Signal K to N2K converter", and there i have selected System Time, Heading, Attitude, Positing_Rapid, SOG_COG.
Than i will immediately see the positioning information on my i70s.
But i will not transmit AIS data or the GPS data in the right PGN/sentence for my VHF radio. Still looking how that can be fixed.
I was just looking through the code: https://github.com/sailoog/openplotter/b...from-SK.py
The list of PGNs i see in OpenPlotter CAN tab (when i press the "Signal K to N2K converter" button) seems to be hardcoded in there. I thought it was an extendable list. I will ask sailoog if i can extend this myself.
Gr.
Bram.
I am using openplotter 1.0.0.
On the CAN tab in OpenPlotter i have selected Enable N2K output.
On that same tab i selected "Signal K to N2K converter", and there i have selected System Time, Heading, Attitude, Positing_Rapid, SOG_COG.
Than i will immediately see the positioning information on my i70s.
But i will not transmit AIS data or the GPS data in the right PGN/sentence for my VHF radio. Still looking how that can be fixed.
I was just looking through the code: https://github.com/sailoog/openplotter/b...from-SK.py
The list of PGNs i see in OpenPlotter CAN tab (when i press the "Signal K to N2K converter" button) seems to be hardcoded in there. I thought it was an extendable list. I will ask sailoog if i can extend this myself.
Gr.
Bram.