I double-checked everything. Here are the pictures.
Code:
pi@openplotter:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.79-v7l+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1373 SMP Mon Nov 23 13:27:40 GMT 2020
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000023c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 933632
[ 0.000000] DMA zone: 1917 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 163584 pages, LIFO batch:31
[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920
[ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 931715
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:63:28:68 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=00fe0b43-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x1ccc0000-0x20cc0000] (64MB)
[ 0.000000] Memory: 3539864K/3734528K available (10240K kernel code, 739K rwdata, 2816K rodata, 2048K init, 854K bss, 129128K reserved, 65536K cma-reserved, 3080192K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31111 entries in 61 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x518 with crng_init=0
[ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000023] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000099] bcm2835: system timer (irq = 17)
[ 0.000768] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000784] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000800] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000813] Switching to timer-based delay loop, resolution 18ns
[ 0.001049] Console: colour dummy device 80x30
[ 0.001082] printk: console [tty1] enabled
[ 0.001134] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001156] pid_max: default: 32768 minimum: 301
[ 0.001305] LSM: Security Framework initializing
[ 0.001497] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001520] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002875] Disabling memory control group subsystem
[ 0.003003] CPU: Testing write buffer coherency: ok
[ 0.003506] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004414] Setting up static identity map for 0x200000 - 0x20003c
[ 0.004618] rcu: Hierarchical SRCU implementation.
[ 0.005299] smp: Bringing up secondary CPUs ...
[ 0.006488] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007818] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009085] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009241] smp: Brought up 1 node, 4 CPUs
[ 0.009258] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.009270] CPU: All CPU(s) started in HYP mode.
[ 0.009283] CPU: Virtualization extensions available.
[ 0.010039] devtmpfs: initialized
[ 0.024347] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.024593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024621] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026602] pinctrl core: initialized pinctrl subsystem
[ 0.027603] NET: Registered protocol family 16
[ 0.031624] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.032211] audit: initializing netlink subsys (disabled)
[ 0.032457] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.033625] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.033639] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.033969] Serial: AMBA PL011 UART driver
[ 0.037705] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.060828] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-11-18 19:55, variant start
[ 0.070844] raspberrypi-firmware soc:firmware: Firmware hash is 8e01026adc5a87d80f8748fc6a4fecb9012393cc
[ 0.125051] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.130113] vgaarb: loaded
[ 0.130576] SCSI subsystem initialized
[ 0.130799] usbcore: registered new interface driver usbfs
[ 0.130869] usbcore: registered new interface driver hub
[ 0.131034] usbcore: registered new device driver usb
[ 0.131370] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 0.133256] clocksource: Switched to clocksource arch_sys_counter
[ 0.892253] VFS: Disk quotas dquot_6.6.0
[ 0.892353] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.892520] FS-Cache: Loaded
[ 0.892715] CacheFiles: Loaded
[ 0.903161] thermal_sys: Registered thermal governor 'step_wise'
[ 0.903697] NET: Registered protocol family 2
[ 0.904445] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.904476] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.904534] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.904601] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.904751] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.904785] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.905041] NET: Registered protocol family 1
[ 0.905771] RPC: Registered named UNIX socket transport module.
[ 0.905784] RPC: Registered udp transport module.
[ 0.905797] RPC: Registered tcp transport module.
[ 0.905810] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.905831] PCI: CLS 0 bytes, default 64
[ 0.907795] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.909985] Initialise system trusted keyrings
[ 0.910218] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.921106] FS-Cache: Netfs 'nfs' registered for caching
[ 0.921848] NFS: Registering the id_resolver key type
[ 0.921880] Key type id_resolver registered
[ 0.921893] Key type id_legacy registered
[ 0.921916] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.923033] Key type asymmetric registered
[ 0.923047] Asymmetric key parser 'x509' registered
[ 0.923285] bounce: pool size: 64 pages
[ 0.923329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.923564] io scheduler mq-deadline registered
[ 0.923578] io scheduler kyber registered
[ 0.927598] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.927622] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.927693] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 0.927765] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[ 0.985403] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[ 0.985724] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.985742] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.985763] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.985821] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.986091] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.989498] PCI: bus0: Fast back to back transfers disabled
[ 0.989727] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.989876] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.990309] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.993751] PCI: bus1: Fast back to back transfers disabled
[ 0.993811] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.993835] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.993917] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.993942] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.994260] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.994513] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
[ 0.994905] pcieport 0000:00:00.0: AER: enabled with IRQ 55
[ 0.995242] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.995965] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.025114] Console: switching to colour frame buffer device 180x56
[ 1.031946] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1440x900
[ 1.038632] iproc-rng200 fe104000.rng: hwrng registered
[ 1.038980] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[ 1.039677] vc-sm: Videocore shared memory driver
[ 1.040262] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.052703] brd: module loaded
[ 1.065401] loop: module loaded
[ 1.066857] Loading iSCSI transport class v2.0-870.
[ 1.068909] libphy: Fixed MDIO Bus: probed
[ 1.069546] bcmgenet fd580000.ethernet: failed to get enet clock
[ 1.069566] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.069589] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[ 1.069611] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[ 1.069639] bcmgenet: Skipping UMAC reset
[ 1.083340] libphy: bcmgenet MII bus: probed
[ 1.163373] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.164407] usbcore: registered new interface driver r8152
[ 1.164491] usbcore: registered new interface driver lan78xx
[ 1.164551] usbcore: registered new interface driver smsc95xx
[ 1.164994] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.165030] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.167522] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
[ 1.168845] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.168863] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168879] usb usb1: Product: xHCI Host Controller
[ 1.168894] usb usb1: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[ 1.168909] usb usb1: SerialNumber: 0000:01:00.0
[ 1.169547] hub 1-0:1.0: USB hub found
[ 1.169643] hub 1-0:1.0: 1 port detected
[ 1.170206] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.170232] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.170256] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.170785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.170803] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170819] usb usb2: Product: xHCI Host Controller
[ 1.170834] usb usb2: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[ 1.170848] usb usb2: SerialNumber: 0000:01:00.0
[ 1.171440] hub 2-0:1.0: USB hub found
[ 1.171532] hub 2-0:1.0: 4 ports detected
[ 1.173046] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.173391] dwc_otg: FIQ enabled
[ 1.173404] dwc_otg: NAK holdoff enabled
[ 1.173416] dwc_otg: FIQ split-transaction FSM enabled
[ 1.173432] Module dwc_common_port init
[ 1.173892] usbcore: registered new interface driver uas
[ 1.173996] usbcore: registered new interface driver usb-storage
[ 1.174207] mousedev: PS/2 mouse device common for all mice
[ 1.176095] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.179637] sdhci: Secure Digital Host Controller Interface driver
[ 1.179650] sdhci: Copyright(c) Pierre Ossman
[ 1.180309] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.180868] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.184752] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.185066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.185256] usbcore: registered new interface driver usbhid
[ 1.185268] usbhid: USB HID core driver
[ 1.186371] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 1.188417] [vc_sm_connected_init]: start
[ 1.197965] [vc_sm_connected_init]: end - returning 0
[ 1.200189] Initializing XFRM netlink socket
[ 1.200242] NET: Registered protocol family 17
[ 1.200352] Key type dns_resolver registered
[ 1.200807] Registering SWP/SWPB emulation handler
[ 1.201162] registered taskstats version 1
[ 1.201184] Loading compiled-in X.509 certificates
[ 1.201734] Key type ._fscrypt registered
[ 1.201748] Key type .fscrypt registered
[ 1.212650] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.212739] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[ 1.218946] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.219965] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.219981] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.268549] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.270206] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.271864] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.275350] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.277023] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.283930] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.287171] of_cfs_init
[ 1.287291] of_cfs_init: OK
[ 1.288307] Waiting for root device PARTUUID=00fe0b43-02...
[ 1.319691] random: fast init done
[ 1.346233] mmc1: new high speed SDIO card at address 0001
[ 1.533294] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.715915] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.715933] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.715949] usb 1-1: Product: USB2.0 Hub
[ 1.717766] hub 1-1:1.0: USB hub found
[ 1.718084] hub 1-1:1.0: 4 ports detected
[ 1.863768] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.896854] usb 2-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 1.896871] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.896887] usb 2-1: Product: USB3.1 Hub
[ 1.896902] usb 2-1: Manufacturer: GenesysLogic
[ 1.900372] hub 2-1:1.0: USB hub found
[ 1.900778] hub 2-1:1.0: 4 ports detected
[ 2.043328] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 2.176580] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 2.176598] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.176613] usb 1-1.1: Product: USB2.1 Hub
[ 2.176629] usb 1-1.1: Manufacturer: GenesysLogic
[ 2.178419] hub 1-1.1:1.0: USB hub found
[ 2.178764] hub 1-1.1:1.0: 4 ports detected
[ 2.273858] usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.305244] usb 2-1.4: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
[ 2.305262] usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.305278] usb 2-1.4: Product: AS2115
[ 2.305293] usb 2-1.4: Manufacturer: ASMedia
[ 2.305308] usb 2-1.4: SerialNumber: 00000000000000000000
[ 2.309282] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 2.309869] scsi host0: usb-storage 2-1.4:1.0
[ 2.403293] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[ 2.569818] usb 1-1.3: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10
[ 2.569836] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.569852] usb 1-1.3: Product: USB Keyboard
[ 2.569867] usb 1-1.3: Manufacturer:
[ 2.595075] input: USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:1603.0001/input/input0
[ 2.653295] usb 1-1.1.3: new high-speed USB device number 5 using xhci_hcd
[ 2.664020] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:01:00.0-1.3/input0
[ 2.691054] input: USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1603.0002/input/input1
[ 2.753620] input: USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1603.0002/input/input2
[ 2.753959] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:01:00.0-1.3/input1
[ 2.804544] usb 1-1.1.3: New USB device found, idVendor=0bda, idProduct=818b, bcdDevice= 2.00
[ 2.804562] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.804578] usb 1-1.1.3: Product: 802.11n WLAN Adapter
[ 2.804593] usb 1-1.1.3: Manufacturer: Realtek
[ 2.804608] usb 1-1.1.3: SerialNumber: 1CBFCEBA93EC
[ 2.903376] usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
[ 3.041267] usb 1-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 3.041285] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.041300] usb 1-1.4: Product: USB Optical Mouse
[ 3.041315] usb 1-1.4: Manufacturer: PixArt
[ 3.050811] input: PixArt USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0003/input/input3
[ 3.051321] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-1.4/input0
[ 3.354195] scsi 0:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 3.355198] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.355957] sd 0:0:0:0: [sda] Write Protect is off
[ 3.355975] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.356843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.360263] sda: sda1 sda2
[ 3.363572] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.440229] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.440310] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.441839] devtmpfs: mounted
[ 3.450629] Freeing unused kernel memory: 2048K
[ 3.453630] Run /sbin/init as init process
[ 3.741690] systemd[1]: System time before build time, advancing clock.
[ 3.827004] NET: Registered protocol family 10
[ 3.828398] Segment Routing with IPv6
[ 3.855481] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.856289] systemd[1]: Detected architecture arm.
[ 3.906992] systemd[1]: Set hostname to <openplotter>.
[ 4.635793] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.647460] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.648212] systemd[1]: Listening on Syslog Socket.
[ 4.648682] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.649328] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.649764] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.650656] systemd[1]: Listening on Journal Socket.
[ 4.658509] systemd[1]: Mounting Kernel Debug File System...
[ 4.660540] systemd[1]: Listening on Journal Audit Socket.
[ 4.660833] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 4.892513] Driver for 1-wire Dallas network protocol.
[ 4.905470] i2c /dev entries driver
[ 5.810612] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.922296] systemd-journald[113]: Received request to flush runtime journal from PID 1
[ 6.688166] i2c-gpio 300000002.i2c: using lines 2 (SDA) and 3 (SCL)
[ 6.814250] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 6.819631] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 6.820266] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 6.820773] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 6.984311] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.987790] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 6.987815] [vc_sm_connected_init]: start
[ 7.006981] [vc_sm_connected_init]: installed successfully
[ 7.051931] mc: Linux media interface: v0.10
[ 7.084343] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.088897] spi-bcm2835 fe204000.spi: chipselect 0 already in use
[ 7.088920] spi_master spi0: spi_device register error /soc/spi@7e204000/spidev@0
[ 7.088944] spi_master spi0: Failed to create SPI device for /soc/spi@7e204000/spidev@0
[ 7.112147] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 7.117037] videodev: Linux video capture interface: v2.00
[ 7.120867] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 7.213160] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.213332] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.227584] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.229467] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.246448] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.267423] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.267468] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 7.284891] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.285006] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 7.295393] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.295435] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 7.328030] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.328566] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.329084] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.329432] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.329465] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.329493] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.329528] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.329548] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.329751] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 7.395446] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.595884] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.638491] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.654698] 8192eu: loading out-of-tree module taints kernel.
[ 7.706207] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.720011] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.720514] usbcore: registered new interface driver brcmfmac
[ 7.732498] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[ 7.973665] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.983548] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[ 8.012342] random: crng init done
[ 8.012356] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.349215] usbcore: registered new interface driver rtl8192eu
[ 8.648489] brcmfmac mmc1:0001:1 wlan9: renamed from wlan0
[ 8.822907] CAN device driver interface
[ 8.862787] mcp251x spi0.1 can0: MCP2515 successfully initialized.
[ 10.114116] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
[ 10.703872] uart-pl011 fe201000.serial: no DMA platform data
[ 11.138290] Loading /home/pi/moitessier/modules/moitessier_5.4.79-v7l+.ko
[ 11.441239] 8021q: 802.1Q VLAN Support v1.8
[ 11.575282] Adding 102396k swap on /var/swap. Priority:-2 extents:4 across:151548k FS
[ 12.486063] IPv6: ADDRCONF(NETDEV_CHANGE): wlan9: link becomes ready
[ 14.476556] bcmgenet: Skipping UMAC reset
[ 14.478488] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[ 14.478712] bcmgenet fd580000.ethernet eth0: Link is Down
[ 14.504887] moitessier: Setting owner for /dev/moitessier.tty.
[ 14.508428] moitessier: Setting access mode for /dev/moitessier.tty.
[ 14.530951] moitessier: moitessier.shutdown.service not running. Starting service now.
[ 14.585604] moitessier: started /home/pi/moitessier/scripts/system_shutdown
[ 14.615972] moitessier: PID shutdown=846
[ 14.717200] moitessier_processReqData - HEADER_payloadIsValid(...) failed
[ 14.760517] moitessier_processReqData - HEADER_payloadIsValid(...) failed
[ 15.754476] fuse: init (API version 7.31)
[ 17.811220] Bluetooth: Core ver 2.22
[ 17.811273] NET: Registered protocol family 31
[ 17.811279] Bluetooth: HCI device and connection manager initialized
[ 17.811298] Bluetooth: HCI socket layer initialized
[ 17.811307] Bluetooth: L2CAP socket layer initialized
[ 17.811321] Bluetooth: SCO socket layer initialized
[ 17.825276] Bluetooth: HCI UART driver ver 2.3
[ 17.825285] Bluetooth: HCI UART protocol H4 registered
[ 17.825324] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 17.825469] Bluetooth: HCI UART protocol Broadcom registered
[ 17.852333] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 17.950077] w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d60717eb crc 75
[ 18.183628] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.183637] Bluetooth: BNEP filters: protocol multicast
[ 18.183752] Bluetooth: BNEP socket layer initialized
[ 18.264164] Bluetooth: RFCOMM TTY layer initialized
[ 18.264180] Bluetooth: RFCOMM socket layer initialized
[ 18.264212] Bluetooth: RFCOMM ver 1.11
[ 18.320827] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 21.185568] can: controller area network core (rev 20170425 abi 9)
[ 21.185708] NET: Registered protocol family 29
[ 21.196916] can: raw protocol (rev 20170425)
[ 21.486988] i2c i2c-1: delete_device: Deleting device ds2482 at 0x18
[ 21.529343] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 21.597809] w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d60717eb crc 75