OpenMarine

(2022-02-28, 08:22 PM)Sailoog Wrote: [ -> ]OpenPlotter Network app for OpenPlotter 3 is released, docs will follow.

Test and report as usual please.

Thanks!

Tested in AP mode with USB tethering enabled. Works perfectly, great work Sailoog!

---

(2022-02-28, 09:41 PM)TVR Wrote: [ -> ]

(2022-02-28, 08:22 PM)Sailoog Wrote: [ -> ]OpenPlotter Network app for OpenPlotter 3 is released, docs will follow.

Test and report as usual please.

Thanks!

Tested in AP mode with USB tethering enabled. Works perfectly, great work Sailoog!

I spoke too soon. Everything shows up as connected, but any device connected via wifi complains it has no internet connection (despite USB tethering being enabled).

Sorry if I'm in The wrong place for this question: how do we install pypilot and i2c. Thanks go all and Bests regards from Belgium !

Hello meretvent,
You can't install the apps yet. They are currently still under development. You can see the development status in the first post.
Greetings Jürgen

Thanks Lukberts !
Congratulations for your great job !
Have a good day
Ed

Great job to date, all!
I have been testing, and everything worked for me here (Flatpac with no charts on this system (till I get my dongle), and GPS and a SSD boot). Speed fantastic.  Signal K perfect.
However, hit my first small issue.  I tried to load the Network app,  Its grayed out on my image (downloaded last Thursday).  I hit refresh and get candidates (in all orders) and the Network app is still grayed out.
Log files:
(Get Candidates)

Hit:1 http://ppa.launchpad.net/opencpn/opencpn/ubuntu focal InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Get:7 https://dl.cloudsmith.io/public/openplot...deb/debian bullseye InRelease [4,956 B]
Hit:8 https://www.free-x.de/deb4op bullseye InRelease
Fetched 4,956 B in 2s (2,076 B/s)
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.

Any suggestions?
Regards
Finbar

Can I ask if your using the raspberry pi or a lab top? I could not get the flatpak to download charts correctly, do I need to use a single also? Thank you!!

FYI, I couldn't work out what was wrong - or if it is expected. I wiped the SSD and reinstalled the image I downloaded last week - could then access network.
Finbar

(2022-03-02, 01:20 AM)John1270 Wrote: [ -> ]Can I ask if your using the raspberry pi or a lab top? I could not get the flatpak to download charts correctly, do I need to use a single also? Thank you!!

what charts?

(2022-02-27, 09:16 PM)Sailoog Wrote: [ -> ]CAN Bus section in OpenPlotter docs 3 is done!

https://openplotter.readthedocs.io/en/3....n_app.html

working on OpenPlotter Network app now.

Awesome! Do you have a running changelog between V2 and V3? I'm new to this project but have been sinking my teeth in lately. Would love to see a list of what's totally new in V3 vs V2.

Error installing signal K ver 3.2.1 :

npm verb node v16.14.0
npm verb npm  v8.3.1
npm ERR! code ENETUNREACH
npm ERR! syscall connect
npm ERR! errno ENETUNREACH
npm ERR! request to https://registry.npmjs.org/signalk-server failed, reason: connect ENETUNREACH 104.16.21.35:443



Help ? thank you